[Paul hughes]

Hi
I am trying to cast bullets in resin but a thin layer of air is around the Buillet when the resin is set, do I need to do something to the bullet first before putting in the mould, and what is the best resin to use for a clear cast in two hits up to 25mm deep
Thank you and best regards
Paul

[Katherine Swift]

Hi Paul,

It sounds like you are experiencing ‘silvering’. This forum post explains more: https://resinobsession.com/forums/reply/524/

How much resin volume are you casting at once? That will best help me with a specific resin recommendation.

[Paul hughes]

Hi Katherine
I am pouring between 10mm and 20mm at a time

[Katherine Swift]

Hi Paul,

If you are mixing three ounces of resin or less at once, then the Resin Obsession super clear resin is my choice:
https://shop.resinobsession.com/collections/resin/resin-obsession-super-clear-resin

If you are mixing three ounces of resin or more at once, they go with the Resin Obsession deep pour resin:
https://shop.resinobsession.com/collections/resin/resin-obsession-deep-pour-resin

[Author]

Posts