[alex snyder]

I always mix thoroughly pour etc..

The bottom/ spot exposed to air keeps coming out sticky?
Every other part is cured hard and not at all sticky.

Should I redo the mould with clay attached to bottom so none of the final product is exposed or something

[alex snyder]

I also make more than I’ll need and pour back and forth between two cups to guarantee mixing

[Katherine Swift]

Hi Alex,

What kind of resin are you using?

In the meantime, this article explains why resin cures sticky: https://resinobsession.com/resin-frequently-asked-questions/why-is-my-resin-sticky/

[Alex snyder]

Epoxy.
I’m going to try a new mold but with clay or something on the bottom as sacrificial material.

It always seems to be a few millimeters past the exposed bottom.

[Katherine Swift]

Hi Alex,

It’s not normal for epoxy to cure with any stickiness (for example like a polyester can). Have you read the article at the link above? It should give you some ideas as to what can be going on.

[Author]

Posts