[Ingrid Woest]

Hi There I have been asked to make pitch forks for golfers and i wonder i you could advise me on what resin to use. I need a clear resin so I can make coloured motifs in. Would i use polyester or epoxy? It must set very hard so the fork can lift the grass up on the green. I don’t want to use a filler as they want clear.
Tx

[Katherine Swift]

Hi Ingrid,

Unfortunately, resin isn’t a good choice for a project like this. I would expect any resin that cures hard for a project like this to break under the pressure of lifting grass and dirt.

[Author]

Posts