[Katherine Swift]

This question comes though email by Dell:

Would it be possible to make a belt buckle of resin?  For instance, using a large rose mold and putting hardware of some sort in the back after the resin has been poured.  Would the resin hold up to average wear and tear?

[Katherine Swift]

Hi Dell,

Yes, you can make a resin belt buckle. We have a mold specifically for that purpose: https://resinobsession.com/ItemPage/5302/Belt-Buckle-Oval-Mold-759.htmlI would suggest either using the Resin Obsession super clear resin:https://shop.resinobsession.com/collections/resin/products/resin-obsession-super-clear-resin-6-oz-kit-jewelry-quality-resin

[Dell]

 Thank you for your info.  I dont see on the mold how to put a bar across the back.  Is there something to imbed or glue on after the resin sets?

[Katherine Swift]

We dont have a mold for the hardware or have it as a purchase option.  I would suggest doing a search for belt buckle hardware or belt buckle findings to find the hardware for the back.  I would then use a little bit of mixed up resin to secure the hardware to the back of your resin casting.

[Heather]

 The hardware can be found by searching craft sites for "Oval Belt Buckle Blanks"

[Author]

Posts