[Andrew C]

Greetings!

I’m interested in pouring resin panels (>1/4″ thick) to cut up and use to make stained “glass” pieces. I haven’t found much online of people doing that (pouring into the caming/leaded outline seems more common), so I was curious if there is a reason that this wouldn’t work well. I was also curious about what happens if epoxy resin are manipulated (such as bending or stamping) part way through the cure. If a sheet work is bent will that make the piece weaker?

Best regards,
Andrew

[Katherine Swift]

Hi Andrew,

Yes, you can shape resin! I show you how to do that here: https://resinobsession.com/resin-tutorials/how-to-shape-resin/

[Author]

Posts