[Katherine Swift]

This question comes from Anne:

Hello everyone at my new, favorite place,

I am brand new at this so I have attached my first problem with my very first try at this.

Can you tell me what all these tiny dots are??? Please.

I read all I could on your website before this attempt and I got all the bubbles out but these seem like something else, plus the dots are evenly consistant through the whole pendant.

Any ideas, please?

[Katherine Swift]

Hi Anne,

Those are microbubbles in your resin. The easiest way I find to avoid the bubbles is to warm your resin before mixing and casting. This article shows a way to do it: https://resinobsession.com/resin-resin-resin/resin-casting-in-cold-weather

[Delana]

Mine is a 2 part question about microbubbles,
1. Would it help to sit mixed resin on a cup/candle warmer?
2. What seems to work best for surface bubbles….heat gun or torch?
Let me say, i use epoxy resin on necklaces and earrings.

Thanks for the help!

[Katherine Swift]

Hi Delana,

You would do better to warm up the resin and hardener in a hot water bath before using. You can see what I’m talking about here: https://resinobsession.com/resin-resin-resin/resin-casting-in-cold-weather

I have always used a heat gun for surface bubbles.

[Author]

Posts