- This topic has 4 replies, 2 voices, and was last updated 4 years, 2 months ago by
.
-
Posts
-
-
Hello, of course this question isn’t the first.
I need to fill 64 Cubic Feet of Rubber Mold with Epoxy Resin that weighs ruffly
9LBS. (I read it’s the Weight of some 1 Gallon jugs of Epoxy.)How much Resin will I need?
It’s a 11×14 shadow box frame made of Mold Max 29NV silicone rubber.
6.07 LBs were needed. It’s 11 Lbs for near $100 Online.I’ve measured the frame it’s (L 15.5″ x W 11.38″ x H 3″).
But because it’s not solid in the center, I did the math by imagining all the side were stretched out in a long rectangle line of L 56″ x W 3″ x H 5″.
If I filled the mold with water, could that be a good comparison in gallons to how much resin I need even if it’s thicker ?
Thanks .
-
There’s a typo: L 56″ x W 3″ x H 1/2″
-
We do have a couple of articles on knowing how much resin to mix to cover a surface or fill a mold. Links to them are here:
https://www.resinobsession.com/resin-frequently-asked-questions/how-much-resin-do-i-need
https://www.resinobsession.com/resin-art/how-to-apply-a-glossy-resin-layer-to-a-painting -
https://www.resinobsession.com/resin-frequently-asked-questions/how-much-resin-do-i-need
Excellent! Very Helpful.
-
We have a resin calculator here that does the math for you: https://www.resinobsession.com/resin-calculator/
-
- The topic ‘How much Epoxy Resin will be needed?’ is closed to new replies.