Cloth is scratching the resin when cleaning

Tagged: 

Viewing 2 reply threads
  • Author
    Posts
    • March 22, 2018 at 6:39 pm #12776
      Clare
      Guest

      Project: Adhearing recycled glass to a glass pane with Epoxy (use it as a glue). After that cures I pour Epoxy over the piece and allow it to cure as a second layer.
      Resin used: ArtResin. I followed instructions and mixed slowly for 3 minutes while scraping sides and mixing stick.
      Problem: I’ve allowed people to touch it which accumulated a couple finger prints and tiny pieces of lint. I used a microfiber (supposed to be lintless) cloth and dampened it. I very lightly buffed the area and it still left a couple scratches.
      Question: Is this normal? When I leave a piece in a drawer or on a table, it will inevitably accumulate some amount of dust. How should I clean it? Or was the Epoxy for that particular piece mixed wrong or something? Should it not be soft enough for that to happen? Thank you for your time!

    • March 22, 2018 at 11:41 pm #12777
      Katherine Swift
      Keymaster

      Hi Clare,

      I haven’t worked with ArtResin, so I don’t know how hard it cures. In general though, a baby wipe works well to clean without leaving scratches. That’s what I would try next.

    • March 23, 2018 at 3:50 am #12783
      Clare
      Guest

      Oops, sorry – that wasn’t the ArtResin piece. I used 3 different brands to compare, this was the Resin Obsession one. In any case, thanks for the suggestion! Would you also suggest if there is a scratch, to pour a second coat maybe?

      • March 23, 2018 at 4:11 pm #12789
        Katherine Swift
        Keymaster

        I think a another pour always works best if it’s possible.

  • Author
    Posts
Viewing 2 reply threads
  • The topic ‘Cloth is scratching the resin when cleaning’ is closed to new replies.