- This topic has 3 replies, 2 voices, and was last updated 6 years, 5 months ago by
.
-
Posts
-
-
I normally make resin soap dishes set with small river pebbles. Normally I use a 3×5 plastic mold. A customer has asked me if I can make a 4.5′ x 29″ similar pebble soap dish. She wants something to display several soaps (don’t ask me why). A few questions:
1. How would I make a mold for something like this? I have NO idea.
2. Do you think it would be too fragile because it is so long and thin? I assume I would need to make it thicker than I usually do?
3. Normally I use Easy Cast Clear resin. Would this be OK for a larger project?Thanks
Peggy -
Sorry that is supposed to say: 4.5″ x 29″ inches!!
-
Hi Peggy,
What an interesting project! To make a soap dish in the larger size, you will need a mold that size. Since it sounds like you don’t have a mold already like that, you will need to make one. You will need to have a template, then make a mold of that template. This article details more: https://www.resinobsession.com/resin-frequently-asked-questions/tips-for-selecting-a-model-for-your-next-mold Once you have your template, this article should help you get started: https://www.resinobsession.com/molds-mold-making/basic-mold-making-tips
In terms of using Easy Cast resin for this project, you will likely be okay. In my opinion, I think when fully cured, this resin is still rather soft. If anything, I would worry about it denting if someone dropped a casting this size on the floor.
-
-
Thanks Katherine!!!
-
- The topic ‘Making rectangular mold’ is closed to new replies.