- This topic has 2 replies, 2 voices, and was last updated 6 years ago by
.
-
Posts
-
-
This question comes through email by Heather:
“The lockets are window lockets, but there is no backing to hold the resin in place. What can I do to keep the resin in place so that it sets?”
-
Heather,
You will want to press your open backed pendants firmly onto a piece of masking tape. Make sure to press around all the edges well so there is a good seal to keep resin from running out underneath.
The masking tape will give a textured surface to that side of the resin, so you may need to sand or pour a thin layer of resin over that surface to get it to look smooth again.
Good luck!
-
Here’s a few tutorials showing the techniques:
https://resinobsession.com/resin-tutorials/how-to-use-resin-in-open-bezels
https://resinobsession.com/resin-tutorials/open-backed-pendant-tutorial
-
- The topic ‘How can I keep my resin in an open backed bezel?’ is closed to new replies.